About Us

We make every TonKontrol circuit ourselves, from start to finish. An electrical-electronics engineer designs them by listening to what musicians ask for, we do the production ourselves, and we test every finished circuit. We also choose our parts from well-established brands on the market.

Design

The designs for all the circuits we produce are made by Electrical-Electronics Engineer Kenan Budak. During the design process, we hold one-on-one meetings with many musician friends to identify their needs and get their opinions.

When deciding which circuits to design, we take the requests and suggestions of musician friends into account. Hardware and software designs are made using the technology each circuit needs, and several prototypes of the same circuit are built to reach the most ideal conditions.

Production

We carry out all production stages of the circuits ourselves. When production is complete, every circuit is tested and stamped with its production date.

Materials

All materials used in production are chosen from well-established, high-quality brands. Some of the electronic components we use have the following specifications:

Printed circuit board (PCB)

• Single or, usually, double layer
• Plated through-holes
• 1.6 mm thickness
• Red/green solder mask
• White silkscreen
• High quality

Resistor

• Metal film resistor
• 1% tolerance

Capacitor

• Polyester or monolithic capacitor, 10% tolerance
• Miniature 105 °C electrolytic capacitor
• Tantalum SMD capacitor, 10% tolerance

Switches, potentiometers and jacks

• First-class Taiwanese-type switches
• Mini or miniature switch types
• 13 mm long-shaft potentiometer
• High-quality metal stereo jack

Cables

• High-quality shielded cable at the output
• High-quality hookup wire for assembly

Semiconductors

• Semiconductors from well-known brands

Knobs

• Aluminum alloy
• High-quality finish
• Black, silver and gold
• 13 mm diameter